FATEK Automation Corp. Was established in 1992 in Taiwan by a group of engineers engaged in PLC design and development for many years. Since its establishment, FATEK has strived for R&D in order to provide high-quality, high-function and user-friendly automatic control products. The product line focuses on PLC, HMI, IoT solutions, SCADA application software, OPC Server and power supply, etc. Amazon Free one month Unlimited reading and unlimited listening on any device.sign up for free account and have access to thousands of Programming and hardwa.
Now we have our simple program OK; go to PLC => On-line and the Software shows a connection screen wherer Serial RS232 is by default; the Fatek uses RS232 as the main communication port; not all PCs have DB9 connection
Before last connection we have to verify if we have all the Right Drivers, the Serial-USB uses a CH340 Driver, go to Device Manager and if we have our PLC connected (and turned on) between PLC and PC, you can see the list of COM PORTS and LPT
Fatek Winproladder Manual
If we are OK; back to Winproladder and select 'Autocheck'; we can see a screen where we can verify the Port COM 3 is the same that we have seen in 'Manager Device'; Software has recognized the Port..... and So, Let's click and Start
Finally go to RUN and it asks if we are ready to start; Of course if we are sure!
Every Time we have modified the programm, you must Upload the program in 'On-line'!!!
If you find a error between Communication PC and PLC like this:
Fatek Winproladder
The PLC that you have selected in the beginning of the project, is not the same you have connected!